At Coatings Hub NorCal in San Jose and Jamestown, CA, we offer top-of-the-line E2U products to help you prep for your upcoming flooring project. Whether you want to rescue contaminated flooring with the acclaimed E2U MVB15 VOC-compliant epoxy system for concrete substrates, or MVB15 is a moisture vapor barrier.
Highly Specialized Products For Your Trickiest Flooring Needs
E2U MVB15 is VOC-compliant, two-component, 100% solids epoxy system for concrete substrates. MVB15 is a moisture vapor barrier that reduces the permeance of moisture vapor to acceptable levels for applying flooring installation systems and floor coverings. It is compatible with most flooring adhesives and cementitious underlayments, including all E2U adhesives, primers, and underlayments.
Understanding Moisture Vapor: Often referred to as breathability, vapor permeability describes a material’s ability to allow water vapor to pass through it. Unlike bulk water holdout, which refers to water in its liquid form, vapor permeability concerns water in its gas form. E2U MVB15 is a VAPOR barrier (gas form), not a WATER barrier (liquid form). If you have any questions about using a vapor barrier, please get in touch with your local E2U distributor.
Low Prep Office, Bathrooms, And Countertops
E2U Crazy Bond Primer is the revolutionary Primer and complete floor prep system in one. It bonds virtually any surface, including epoxy, paint, asphalt, linoleum wood, metal, VCT, sealed concrete, ceramic tile, masonry, and bituminous roofing. E2U Crazy Bond Primer cuts prep time, seals in slab laitance, and reduces mess and demolition hazards.
It also protects against hydraulic fluid, grease, and other hydrocarbon contaminates within the concrete slab. E2U Crazy Bond Primer is non-toxic and environmentally friendly.
E2U 100% Solids Epoxy is a two-component, high-performance, modified cycloaliphatic epoxy concrete floor coating system. E2U 100% Epoxy features high gloss, low odor, solvent-free, abrasion, and chemical resistance. It has excellent bonding characteristics and can be applied as an 8 to 50-mil coating system. Its design features provide for the highest industrial and commercial demands.
It can also mix with silica sand to make an epoxy mortar to restore damaged concrete or use the epoxy mortar as a floor surfacing overlay to protect the concrete from impact and wear and resist chemical attack if adequately sealed with the same product. It can also be mixed with sand in a slurry consistency to fill voids or coat concrete surfaces. It is non-porous & sanitary, and easy to clean.
E2U Epoxy 4500 is a two-component, 100%, Zero VOC, high-performance modified cycloaliphatic epoxy concrete floor coating system. Its epoxy chemistry provides excellent bonding characteristics. E2U Epoxy 4500 is UV resistant and essentially odorless. It has a long working time and high gloss with outstanding color stability.
E2U Metallic Epoxy is a two-component, high-performance modified cycloaliphatic epoxy concrete floor coating system. Its epoxy chemistry provides excellent bonding characteristics. They are typically applied at a 24-mil thick single coat (50 – 60 SF/gal).
This dynamic blend does not require an activator to be sprayed on the surface to obtain a unique and highly decorative look. It has 45 – 60 minutes of working time and excellent flowability and self-leveling characteristics.
Water Based Urethane
A premium 2-component Waterbase Urethane provides equal, superior performance to Polyaspartic without odor, health, or environmental issues. E2U Waterbase Urethane (WBU) is VOC compliant. It gives hard, durable coatings that feature good gloss, superior abrasion resistance, and UV resistance.
E2U WBU has been formulated to offer a high-performance finish coat for seamless flooring, coating, and architectural concrete applications where odor and health concerns are sensitive. A matte finish is available.
Urethane 321 is a three-component aliphatic urethane floor finish. It is extremely abrasion and scratch resistant. It is chemical resistant & UV stable. It is easy to apply and has a large coverage rate. The combination of A, B, and C components will result in a satin (semi-gloss) finish. It must be applied at 2 – 3 mil thickness (500 – 550 sqft per 1gal kit).
E2U Flooring Products Are Available At Coatings Hub NorCal
Coatings Hub NorCal in San Jose and Jamestown offers a wide range of floor coating solutions, including the popular epoxy resins. Our team is passionate about providing quality customer service. Visit us today, and let us help you find the perfect coating solution for your needs!