At Coatings Hub NorCal in San Jose and Jamestown, CA, we offer top-of-the-line AC Tech products to help you prep for your upcoming flooring project. Whether you want to rescue contaminated flooring with the acclaimed AC•Tech Oil Buster System™ Coating (OBS-C) or need to resolve moisture and alkalinity issues using the AC•TechVapor 2170™ System for vapor recovery, Coatings Hub NorCal has got you covered.

Highly Specialized Products For Your Trickiest Flooring Needs

AC•Tech features high-performing first product layers that enable you to prep your concrete slabs. Flooring failures don’t always mean removing the entire slab and pouring a new one. AC•Tech products can help recover damage such as elevated moisture vapor levels, pin holing, and soaked-in chemical and oil residue.

Clean & Prep Your Slab With AC•Tech Oil Buster System™ Coating (OBS-C)

Is your existing concrete slab an oily, greasy mess? Are you struggling to eliminate the organic compounds and hydrocarbons that prevent your desired adhesives and floor coatings from properly adhering? The OBS-C system allows you to remove these deeply embedded contaminates and reseal your slab in a few days.

  • Fats
  • Hydraulic Fluid
  • Grease
  • Blood
  • Jet Fuel
  • Cooking Oil
  • Gasoline

Busting The Oils Means You Don’t Have To Bust Up Your Floor

AC•Tech Oil Buster System™ products are designed to stick to concrete so that you can finish the project without jackhammering your old slab and pouring a new one. Start with one or more applications of the biodegradable AC•Tech Oil Buster System™ Detergent (OBS-D), followed by a high-pressure wash. Once the deep cleaning is complete, apply AC•Tech Oil Buster System™ Coating (OBS-C). This is a zero VOC two-part epoxy that seals any remaining organic contaminants within the concrete, preventing them from interfering with future flooring product applications.

  • Solvent-Free
  • Biodegradable
  • Low VOC
  • Alkalinity Resistant Up To pH 14
  • Removes Oil Without Destroying The Slab
  • 15-Year Material & Labor Warranty

Vapor Recovery Is A Breeze With The AC•Tech Vapor 2170™ System

If you’re facing moisture and alkalinity issues with your concrete slab, don’t throw in the towel just yet. AC•Tech Vapor 2170™ is a fast-curing, zero VOC, and odor-free solution that requires no sand broadcasting. AC•Tech 2170™ epoxy resin is easy to spread and has been shown to bond to properly prepared concrete that has sustained alkalinity levels up to pH14. It also has worked with up to 100% RH moisture levels with no upper MVER limit.

Here Are Some Benefits Of This Single-Coat System

  • Interior & Exterior Applications
  • Easy To Apply
  • Odor-Free
  • Zero VOC Emissions
  • 12 Hour Cure Time
  • Alkaline resistant UpTo pH 14
  • High Chemical & Mechanical Resistance
  • 15-Year Labor & Material Warranty

AC Tech Products Are Available At Coatings Hub NorCal

Coatings Hub NorCal in San Jose and Jamestown offer a wide range of floor coating solutions, including the popular AC•Tech Oil Buster System™ as well as the AC•Tech 2170™ epoxy resin. Our team is passionate about providing quality customer service. Visit us today and let us help you find the perfect coating solution for your needs!

Recent Posts

Start typing and press Enter to search